链板输送带如何拆卸

链板输送带两侧大部分采用热熔封边处理，因为有更换维修的需要，链板输送带每3米或5米会留有供维修使用的活接头，活接头位置为开口销封边。当链板输送带需要拆卸维修时需要讲活接头位置运转至输送机的进出料端链轮上方位置，根据现场情况在开销另一端留出大于链板输送带的宽度以方便抽出穿杆，安装时相同。如果有不明白之处可以在施工时联系链板输送带生产厂家，随时沟通。The two sides of the chain conveyor belt are mostly treated with hot melt edge sealing. Due to the need for replacement and maintenance, there are movable joints left for maintenance every 3 or 5 meters of the chain conveyor belt, and the positions of the movable joints are sealed with split pins. When the chain plate conveyor belt needs to be disassembled and repaired, it is necessary to move the movable joint position to the upper position of the sprocket at the inlet and outlet ends of the conveyor. According to the on-site situation, a width greater than the chain plate conveyor belt should be left at the other end of the overhead to facilitate the extraction and threading of the rod. The installation is the same. If there are any unclear points, you can contact the chain conveyor belt manufacturer during construction and communicate at any time.